Continental Fireplaces Constructeur 36 Serie Manuel D'installation Et D'opération page 28

rough framing
EN
3.2 minimum enclosure clearances
TOP VENT
CEILING
TOP EXIT ENCLOSURE
The appliance requires a minimum enclosure height of 50 1/2" (128.3cm). For temperature requirements, the
enclosure space around and above the appliance must be left unobstructed.
note:
The vent shield is telescopic and must be adjusted to shield the full depth of the combustible wall penetration.
* See "minimum framing dimensions" section for details on reducing vent pipe top clearances.
These parameters also apply to all illustrations in this section.
28
W415-3094 / B / 05.09.22
ENCLOSURE
PLAFOND