DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
DMX-protocol
Control-channel 1 - Colour-wheel
Linear colour change following the movement of the slider.
In this way you can stop the colour-wheel in any position.
Decimal Hexad. Percentage S/F
0 15
00 0F
0% 6%
16 31
10 1F
6% 12%
32 47
20 2F
13% 18%
48 63
30 3F
19% 25%
64 79
40 4F
25% 31%
80 95
50 5F
31% 37%
96 113
60 71
38% 44%
112 127
70 7F
44% 50%
128 255
80 FF
50% 100%
Control-channel 2 - Shutter, strobe
Decimal Hexad. Percentage S/F
0 14
00 0E
0% 5%
15 29
0F 1D
6% 11%
30 250 1E FA
12% 98%
251 255 FB FF
98% 100%
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
S Open / white
S Cyan
S Yellow
S Violet
S Green
S Orange
S Blue
S Pink
F Rainbow effect with increasing speed
S Shutter closed
S No function (shutter open)
F Strobe-effect with increasing speed (max. 7 flashes/sec.)
S No function (shutter open)
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
26/52
51785866_V_1_1.DOC