Dal Zotto Inserto 700 Air Manuel Utilisateur page 68

BURN POT AND COMBUSTION
CHAMBER:
Remove the burn pot completely from the
Š
relevant compartment.
Once the ame guard (A) has been removed,
Š
vacuum the residue in the burn pot.
Š Unblock all the holes in the burn pot using the
supplied poker.
Suck up the ash from the burn pot seat and
Š
combustion chamber.
Re-position the burn pot in its slot and push it
Š
towards the re wall and reposition the ame guard
(A)
Suck up the ash deposit from the ash collection
Š
trays;
NOTE: Use a suitable ash vacuum cleaner with a
speci c container for separation of the ash collected.
ASH DRAWER:
Remove the two ash drawers and empty them
Š
into a dedicated container.
Vacuum the ash deposit in the combustion
Š
chamber compartment.
Š Put the two ash drawers back.
68 ENGLISH
THE FOLLOWING IMAGES ARE FOR ILLUSTRATION PURPOSES