Publicité
Les langues disponibles
Les langues disponibles
STEP 12 - Attach the 2 table brackets (10) to the Kamado (9) using the 4 pre-assembled bolts and nuts per bracket. Note
the position of the brackets on the drawing.
STEP 13 - Attach the 2 table brackets (11) to the Kamado (9) using the 4 pre-assembled bolts and nuts per bracket. Note
the position of the brackets on the drawing.
Assembly instructions
Assembly instructions
11
11
STEP 12 - Attach the 2x table brackets (10) to the Kamado Grill (9) using the 4x pre-attached bolts and dome
STEP 12 - Attach the 2x table brackets (10) to the Kamado Grill (9) using the 4x pre-attached bolts and dome
headed nuts per bracket. Please note the position shown in the above diagram.
STEP 14 - Now place the side tables (15) in the brackets (10 and 11).
STEP 13 - Attach the 2x table brackets (11) to the Kamado Grill (9) using the 4x pre-attached bolts and dome
STEP 13 - Attach the 2x table brackets (11) to the Kamado Grill (9) using the 4x pre-attached bolts and dome
headed nuts per bracket. Please note the position shown in the above diagram.
11
11
15
15
STEP 15 - Insert the Bluetooth thermometer into the recess in the side table and the wire holder and the sensor under
STEP 14 - Insert the 2x table hinge (15) into each of the table brackets (10 & 11).
the table as indicated on the drawing.
The Kamado Grill is now ready to use but please ensure that you have read the curing instructions
STEP 14 - Insert the 2x table hinge (15) into each of the table brackets (10 & 11).
thoroughly prior to use.
The Kamado Grill is now ready to use but please ensure that you have read the curing instructions
thoroughly prior to use.
The Kamado Grill is now ready to use but please ensure you have read these instructions thoroughly prior to use.
headed nuts per bracket. Please note the position shown in the above diagram.
headed nuts per bracket. Please note the position shown in the above diagram.
GB, IE
38
10
10
11
11
10
10
90
90
10
10
9
9
9
9
Publicité
