Main Components - Stabila Laser LAR-250 Mode D'emploi

USA
Operating instructions
The STABILA LAR-250 rotation laser is an easy to operate rotation laser for horizontal
and vertical levelling and plumb lines. The LAR-250 has a sealed casing (IP 65).
It is self-levelling in a range of ± 5°. The laser beam can be received at distances of
up to 570 ft or 175 m with the use of a receiver, even when it is no longer visible to
the naked eye.
We have endeavoured to explain the unit's handling and functioning in as clear
and comprehensible manner as possible. If, however, you still have any unanswered
questions, we should be pleased to provide advice over the telephone at any time
on the following telephone number:
1.800.869.7460 U.S. and Canada

Main components

A
Splitter pentaprism SP:
SP1: vertical beam emission aperture
(1)
(2) SP2: rotation beam emission aperture
(3) ON/OFF switch
(4a)
Automatic levelling On/Off selector switch
Permanent adjustment On/Off selector switch
(4b)
Selector switch for bending the laser beam in one axis
(4c)
(5a) LEDs for displaying:
LED red : battery voltage and overheat
(5b)
LED green : Operating mode ON or READY / OK
(5c)
(6) Shock protection
Battery compartment cover
(7)
(8) 5/8" threaded connector for tripod
(9)
Targeting marks
(10)
Feet for vertical levelling
4 markings to create a plumb-line laser function
E
(11)
(12)
Housing:
designed for exterior use: dust and water protected.
Not submergeable ( IP65 )
Find Quality Products Online at:
GlobalTestSupply
www.
2
.com
sales@GlobalTestSupply.com