Care And Maintenance; Technical Data - Stabila Laser LAR-250 Mode D'emploi

Care and maintenance

• Dirty lens glass on the beam emitter detracts from the quality of the beam.
It should be cleaned with a soft cloth.
• Clean the laser unit with a damp cloth. Do not spray or immerse the unit!
Do not use solvents or thinners!
The LAR-250 rotation laser must be handled carefully, in the same way as any
precision optical instrument.

Technical data

Output:
Self-levelling range:
Levelling accuracy:
Batteries:
Operating life:
Operating temperature range:
Storage temperature range:
Subject to technical modifications.
Guarantee terms and conditions
Stabila provides a guarantee against deficiencies and faults in the assured characte-
ristics because of material or manufacturing faults for a period of 24 months from
date of purchase. Any faults will be eliminated at Stabila's own discretion either by
repairing or replacing the unit. Stabila accepts no wider claims.
No liability is accepted for any faults due to inappropriate treatment (e.g. damage
caused by the unit falling, operation with the wrong voltage or type of current, use of
unsuitable current supply sources) or for any autonomous changes made to the unit
by the purchaser or a third party.
Also no claims under guarantee are accepted for natural wear and tear or any small
faults that do not significantly affect the unit's operation.
Any guarantee claims must be made via the dealer on the duly completed guarantee
form (see last page) to be returned with the unit.
Find Quality Products Online at:
< 5 mW, Laser Class IIIa
This product complies with the applicable
requirements of 21CFR parts 1040.10 and 1040.11.
ca. ± 5°
1/8" over 100ft / ± 0,1 mm/m
2 x 1,5 V Mono cells Alkaline, Size D, LR20
Approx. 120 hours
32°F to +122°F / 0°C to +50°C
At temperatures > 50° C or 122°F, the unit begins
to regulate automatically.
-4°F to +140°F / -20 °C à +60 °C
GlobalTestSupply
www.
13
.com
sales@GlobalTestSupply.com