CONSTRUCTA CF2322.4 Notice D'utilisation page 61

Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
Clock function
Minute minder
Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
Notes
Between the times ƒƒ:‹‹ and †:†Š the clock display is
■
dimmed if you do not make any settings in that period or no
clock function is activated.
When you set a clock function, the time interval increases
■
when you set higher values (e.g. cooking time up to‚:‹‹œ to
the minute, using ‚:‹‹œ
to the nearest 5 minutes).
For the Q minute minder, x cooking time, y end of
■
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
Briefly press the KJ clock function button to select a clock
■
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
Press and hold the KJclock function button for 6 seconds.
1.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
Press the KJclock function button briefly.
2.
The clock display switches on.
Timer
Press the KJclock function button repeatedly until the KJ
1.
and Q symbols light up.
Set the duration using the rotary selector (e.g. †:‹‹ minutes).
2.
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ‚:„‹ hours)
The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Clock display
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until
2.
the KJand x symbols light up.
Set the cooking time with the rotary selector
3.
(e.g. ‚:„‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the appliance switches off
automatically.
61