Important Safety Instructions - Festool SYSLITE STL 450 Guide D'utilisation

Masquer les pouces Voir aussi pour SYSLITE STL 450:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 IMPORTANT SAFETY
INSTRUCTIONS
This grazing light has a polarized plug (one blade is wider than the other) as a feature
to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Never use with an extension cord unless plug can be fully in-
serted. Do not alter the plug.
WARNING! Read all safety warnings, instructions, illustrations and speci-
fications provided with this tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
– Handle the device with care. The de-
vice may generate heat that increas-
es the risk of fire and explosions.
– Never use the device in potentially
explosive environments.
– Do not cover the device when
switched on. The device heats up
during operation and can burn the
surface of the skin.
–Warning of harmful light
radiation. Do not look into
the light beam for long pe-
riods. Do not direct the
light beam towards other people or
animals. Optical radiation can dam-
age the eyes.
– Do not use the device for illuminat-
ing the road. The device is not ap-
proved for illuminating the road.
– Do not connect the device to a power
supply when it is wet. If the device
falls into water, it must be dried be-
fore being connected to a power sup-
ply.
– Have your device repaired by quali-
fied specialist staff and always use
original spare partsThe light source
fitted in this device must only be re-
placed by the manufacturer or a cus-
tomer service workshop in order to
ensure that your device operates re-
liably.
– Check the mains plug and the power
cable regularly in order to prevent a
hazard.Disconnect
power cables from the power supply
immediately and have them replaced
by an authorised service workshop.
– When placing the device on a tripod,
ensure that it is stable. In the event
of unstable footing or insecure
mounting, the device may fall and
any
damaged
5

Publicité

Chapitres

Table des Matières
loading

Table des Matières