Safety Information; Cleaning And Storage; Connecting The Room Thermostat - Dantherm TH 2 Manuel D'utilisation Et De Maintenance

IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL
en
PRIOR TO STARTING UP THE HEATER. USING THE DEVICE INCORRECTLY
it
CAN CAUSE SERIOUS OR FATAL INJURIES. KEEP THIS MANUAL FOR
de
es
fr
1. DESCRIPTION
nl
The room thermostat is a useful accessory to con-
trol the room temperature. This means that it can
pt
interact with the heater in order to activate it only
when necessary, to reach the desired tempera-
da
ture. This range of room thermostats have been
designed in line with the most recent safety, oper-
fi
ating and duration criteria.
no
sv

2. SAFETY INFORMATION

pl
WARNINGS
ru
IMPORTANT: This appliance is not sui-
cs
table for use by persons (including children)
with reduced physical, sensory or mental ca-
hu
pacities or who lack experience or knowled-
ge unless supervised by a person respon-
sl
sible for their safety. Children must be su-
pervised to make sure they do not play with
tr
the appliance.
hr
►2.1. Comply with all local laws and regula-
tions in force when using the room thermo-
lt
stat.
►2.2. Power on the room thermostat only with
lv
a current which has the voltage and fre-
quency values specified on the identifica-
et
tion plate.
ro
►2.3. Do not connect extensions to the room
thermostat.
sk
►2.4. Use the room thermostat in a dry place
away from possible damage.
bg
►2.5. Keep the room thermostat and all its
parts at an adequate distance from the hot
uk
parts of the heater.
►2.6. If the power supply cable of the room
bs
thermostat is damaged, it must be replaced
el
by a technical support centre to prevent any
risk.
zh
►2.7. When the heater is not used, always dis-
connect the room thermostat as it could re-
start the device.
FURTHER REFERENCE.
3. UNPACKING
Open the package carefully so as not to damage
the room thermostat. Dispose of the packaging in
accordance with regulations in force.
4. ASSEMBLY
The room thermostat is received pre-assembled
and ready for use.

5. CLEANING AND STORAGE

If the room thermostat is dirty, it must be
disconnected from the power supply or from
the heater, blow it with low pressure air, and if
necessary, clean it with a slightly damp soft cloth
(do not use any type of detergent).
In order to keep the room thermostat in the best
conditions possible, we recommend placing it in
a dry place away from potential external damage.
6. CONNECTING THE ROOM
THERMOSTAT
(PIC. 7-8)
In the case of heaters that come with a potential
room thermostat connection or compatible mod-
els, remove the plug connected to the heater and
connect the room thermostat.
NOTE: If the room thermostat is no longer need-
ed, disconnect it from the heater and restore the
cap on the socket (where applicable).