5.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
NOTICE!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
Cleaning Intervals
NOTICE!
Regular cleaning and disinfection enhances smooth
operation, increases the service life and prevents
contamination.Clean and disinfect the product:
– regularly while in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
NOTICE!
Maximum cleaning temperature:
– 60 °C by hand
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
6 After Use
6.1 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
1557428-E
6.2 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
•
Inspection
•
Cleaning and disinfection
For detailed information, see 5 Maintenance, page 4 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
7 Technical Data
7.1 Technical Data (Fig. 10 – 11)
Dimensions
360 mm
A
425 mm
B
60 mm
C
100 mm
D
150 mm
E
590 mm
F
430 mm
G
490 mm
H
380 mm
I
Possible distance between
the bolt holes of the toilet
bowl:
Weights
Product weight
Maximum user weight
Materials
j
Steel
PP
k
All product components are corrosion resistant and do not
contain natural rubber latex.
7.2 Environmental Parameters
Operating Conditions
Ambient temperature
Relative humidity
Storage and Shipping Conditions
Ambient temperature
Relative humidity
1 Allgemein
1.1 Einleitung
Diese Gebrauchsanweisung enthält wichtige Informationen zur
Handhabung des Produkts. Lesen Sie die Gebrauchsanweisung
180 mm
J
200 mm
K
510 mm
L
205 mm
M
260 mm
N
225 mm
O
285 mm
P
420 mm
Q
440 mm
R
138 mm – 224 mm
S
With armrests
5.0 kg
Without
2.7 kg
armrests
120 kg
PP
l
10 - 40 °C
15% - 93%, non-condensing
0 - 40 °C
30% - 75%, non-condensing
IdeI
5