Publicité
Les langues disponibles
Les langues disponibles
Section
05
Built-in CD Player
Playing a CD
1
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1
Insert a CD into the CD loading slot.
Playback will automatically start.
# You can eject a CD by pressing CD EJECT.
2
After a CD has been inserted, press
SOURCE to select the built-in CD player.
3
Use VOLUME to adjust the sound level.
4
To perform fast forward or reverse,
press and hold c or d.
5
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
10
En
2
CD loading slot
Notes
! The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press CD EJECT to eject the disc, and check
the disc for damage before inserting the disc
again.
! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page
16.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1
Press 4 to turn random play on.
RDM appears in the display. Tracks will play in
a random order.
2
Press 4 to turn random play off.
Tracks will continue to play in order.
Repeating play
Repeat play lets you hear the same track over
again.
1
Press 5 to turn repeat play on.
RPT appears in the display. The track currently
playing will play and then repeat.
Publicité
