VINCENT SA-96 Manuel D'utilisation page 40

Symptom
USB storage
medium is not
accepted - the LED
"DISK" does not
light up.
The music files
are not
accepted - the LED
"MP3" does not
light up.
The remote control
cannot perform any
functions
Humming low
frequency noise is
audible, even as no
audio source is
playing back
Vincent
40
SEARCH FOR ERRORS
Possible Cause
The file system or the device class of the
USB device does not meet requirements.
There are no valid MP3 files on the
connected data medium/player.
No batteries inserted in the remote control,
batteries are not inserted correctly or are
depleted.
The line-of-sight between the remote control
and the unit is obstructed, the range was
exceeded or the hand unit was operated from
a position too far to one side.
The unit is not switched on.
See section "Net frequency noise" in the chapter "Tips".
Countermeasure
Pull out the USB connector and put it back in.
If it still does not work, the USB device
cannot be used with the SA-96.
Copy suitable MP3 files on to the USB
device before inserting it in the SA-96.
Check and replace the batteries if necessary.
Try to point the remote control at the front of
the unit only when the sight-line is clear,
within a 7-metre distance and, if possible,
facing the unit.
Switch on the unit.