VINCENT SA-96 Manuel D'utilisation page 28

11
12
14
15
16
Vincent
28
REAR VIEW
11. POWER CONTROL
These jack connectors (3.5 mm) send the
signals for the standby control (12V Trigger).
Two devices can be connected directly, for
example two SP-996 mono power amplifiers.
12. OUTPUT REC: Output connectors
assigned to a recording device
If desired, you can connect a recording
device like a CD recorder or a tape re-
corder to this output. The stereo signal
of this output is identical to the output
signal of the selected audio source at one
of the inputs "S1", "S2", "S3" or "USB".
It is independent of the Volume setting,
13
the Mute function and the plugging-in
of a headphone.
13. INPUT: Terminal for stereo audio
signals of the source equipment
Here you find three stereo RCA input sockets
for source equipment with analogue stereo
(line level) audio output.
14. OUTPUT: preamplifier outputs
(2x stereo RCA)
With these two pairs of connectors you can
connect the preamplified stereo audio signal
of the currently selected source to the power
amplifier channels. Volume control and Mute
affect the signal at the outputs. One or more
main amplifiers can be connected here to
supply the loudspeakers.
15. FUSE: Fuse holder
This small plastic housing holds the fuse.
Refer to the security precautions.
16. AC: Power Connector
To establish the power supply, connect the
plugs of the power cable to the device and
to a wall outlet.