Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder)
• Recordings will not necessarily be played in the order you
recorded them.
Inserting media
CD
Label facing up
Press [CD/USB] repeatedly to select "CD".
Note:
• Remove the CD only after it stops rotating.
USB device
5 V
1.5 A
Press [CD/USB] repeatedly to select "USB".
Note:
• Insert the USB device directly. Do not use any USB
extension cable.
• Please disconnect the USB device if you finish using.
• Before removing the USB device, select a source other
than "USB".
Media playback controls
The following marks indicate the availability of the feature.
CD audio in CD-DA format or a CD that
[CD]:
contains MP3 files
[USB]:
USB devices containing MP3/AIFF/FLAC/
WAV/AAC/DSD files
[Bluetooth]: Connected Bluetooth
device
®
When connected to an AirPlay compatible
[AirPlay]:
device
[Network]:
When connected to a network contents
playback compatible device
Preparation
• Turn the unit on.
• Insert the media or connect the Bluetooth
network contents playback compatible device.
• Press [CD/USB] or [
] to select the audio source.
– [AirPlay] [Network]: When this system is selected as the
output speakers, the audio source will change to the
network source.
Basic controls
[CD] [USB] [Bluetooth] [AirPlay] [Network]
Play
Press [1/;].
Stop
Press [∫].
• [USB]: The position is memorised and
"RESUME" is displayed.
• [USB]: Press [∫] twice to stop the
playback fully.
Pause
Press [1/;].
Press again to continue playback.
Skip
Press [:] or [9] to skip track.
(main unit: [:/6] or [5/9])
[CD] [USB]: Press [3] or [4] to skip the
MP3/AIFF/FLAC/WAV/AAC/DSD
album.
Search
During play or pause
(Except [Bluetooth]
Press and hold [6] or [5].
(main unit: [:/6] or [5/9])
[AirPlay] [Network])
Note:
• There will be no sound in search operation when playing
DSD files at USB selector.
• To use this unit's remote control with a Bluetooth
the Bluetooth
device must support AVRCP (Audio Video
®
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
•
[Network]:
Some controls may not work depending on the
app in use, etc.
•
Tracks can be selected by pressing the
[CD] [USB]:
numeric buttons.
Viewing available information
[CD] [USB] [Bluetooth] [AirPlay]
You can display the track, artist, album name, file type,
/AirPlay/
®
bit rate, and other information. (The information varies
depending on the audio source.)
Press [DISPLAY] repeatedly.
e.g. [USB] (MP3)
"A
":
Album number
"T
":
Track number
("
" stands for a number.)
"
": Album
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1 and 2 ID3 tags.
• Text data that the system does not support can show differently.
device,
®
"
": Track
9
9