Dometic COOLAIR RTX1000 Guide Pour L'installation page 5

Parking Cooler
t
i
2 RTX1000 / RTX2000 Uni3
12.4 in. (315 mm)
q
13.0 in. (330 mm)
w
≥ 3.9 in. (100 mm)
e
6.9–7.8 in. (175–197 mm)
r
≥ 3.9 in. (100 mm)
t
3 Specifications
NOTICE: The power source for this device must be a
Safety Extra Low Voltage (SELV) source.
Weight
Total battery capacity 180 Ah
Input voltage
EN
q w
y
o
a
s
33.9 in. (860 mm)
y
≥ 3.9 in. (100 mm)
u
25.4 in. (646 mm)
i
< 22.2 in. (565 mm)
o
> 19.7 in. (500 mm)
a
RTX1000: approx. 52.9 lb (24 kg)
RTX2000: approx. 72.8 lb (33 kg)
10–15 VDC
k
e
r
u
;
f
d
33.9 in. (860 mm)
s
> 15.7 in. (400 mm)
d
< 22.6 in. (575 mm)
f
19.7 in. (500 mm)
g
10.4 in. (265 mm)
h
4 Construction requirements
Before installing the parking cooler, check whether
any vehicle components could be damaged or have
their function impaired as a result of the installation, see
"Component Dimensions" on page 4.
The maximum dimension refers to the contact face
required for the seal. The minimum size refers to the
diameter of the opening required.
For parking coolers with a cover frame: The cover frame is
screwed from below to the air conditioner inside the cab.
This requires a certain area of roof lining to be available.
g
h j
l
2)
9.3 in. (235 mm)
j
3.5 in. (90 mm)
k
15.7 in. (400 mm)
l
11.1 in. (283 mm)
;
11.3 in. (288 mm)
2)
Specifications
5