Sun/Delay (Sun Threshold) - Selve i-R Marki Send Plus Notice D'utilisation

GB
Programming
SETTING

SUN/DELAY (sun threshold)

1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING
appears.
3. Confirm by pressing OK.
Note: This dialog window is only displayed if a sensor with a light sen-
sor has been programmed.
4. SUN M will appear.
5. Use the +/- button to adjust the sunlight setting. (The two left-
hand figures on the display show the current sunlight setting.)
Note: The dialogue field only displays DELAY M and DELAY L when
the EXPERT MODE is set to ON in the functions menu.
6. Confirm by pressing OK. DELAY M appears.
7. Use the +/- button to adjust the delay time.
66