Transmitter Programming Procedure; I-R Marki Send Plus Special Feature - Selve i-R Marki Send Plus Notice D'utilisation

Transmitter programming procedure

Transmitter programming procedure
The operating instructions provided with receivers and other trans-
mitters must be complied with at all times.

i-R Marki Send Plus special feature!

In order to display the current wind and sun values of the sensor
it has to be programmed in the i-R Marki Send Plus. To achieve
this, select the FUNCTION/PROGRAMME MODE menu (M, +, +,
+, OK, OK buttons from the OPERATING MODE). Activate the
programme mode = ON (+ button). Subsequently press the PROG
button of the sensor briefly. The wind and sun values are shown
on the display.
Display
SUN
–– 00
M - + OK
Display
PROGRAMME
MODE
OFF
M - + OK
Display
SUN
00 04
M - + OK
Display
➡
TIME/DATE
M -
3 x
Display
➡
PROGRAMME
MODE
ON
M -

Display
➡
+ OK M
Sensor
➡
+ OK
1 sec.
75
➡
FUNCTION
- + OK
2 x
➡
GB