Intermediate Position, Canopy Tension/Tilt - Selve i-R Marki Send Plus Notice D'utilisation

GB
Programming
SETTING

INTERMEDIATE POSITION, CANOPY TENSION/TILT

1. You have confirmed the SUN/DELAY menu levels. INTER-
MEDIATE POSITION will appear.
2. You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated
in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK. CANOPY TENSION/TILT will appear.
4. You can set the switching time to move to CANOPY TENSION/
TILT using the +/- button. The switching time is indicated in a
few seconds or you can move to the CANOPY TENSION/TILT
from the lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5. The function CANOPY TENSION/TILT has now been set.
Please read on for further programming options using the
SETTING menu.
68