Publicité
Les langues disponibles
Les langues disponibles
How to work with twist drills
Twist drills with MT 4 shank can be inserted directly into the arbor.
•
• For a maximum enlargement of the stroke when using twist drills, drill chucks and tapping attachments
the motor can be continuously adjusted on the slide by loosening the Allen screw.
Tapping
• With a tapping attachment with MT4 shank, threads up to M 42 can be tapped.
Cleaning and care
Pull plug prior to cleaning to avoid injuries by unintentional switching on of the machine.
• Clean the outside of the motor with dry compressed air.
• Check connecting lines on damages.
• Clean and grease sliding surfaces regularly. Should lateral play arise by wear of the dovetail guide then this
can be evened out by adjusting the laterally positioned set screws.
• After the work is finished we recommend to store the Metal Core Drilling Machine in the transport case in
a lying position.
Maintenance and repair
• Maintenance, check and repairs are only to be made by electronics specialists according to the valid regulations
of the respective country.
• The Metal Core Drilling Machine ALFRA ROTABEST should be serviced after appr. 250 hours running time by
our ALFRA workshop or appointed dealers.
• The gear oil (Lubcon, Turmogearoil PE 150 300ml) should be exchanged as well as the brushes after that
running time.
Only use genuine ALFRA spare parts.
17
Publicité
