Publicité
Les langues disponibles
Les langues disponibles
No.
Connector
1
RJ-45
2
DC Jack
Connections
Connecting the Network
Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover
cable is used for directly connection to PC, while a direct cable is used for connection to a
hub. You can also use a router featuring PoE (Power over Ethernet) to supply power to the
camera.
Connecting the Power
Connect power of 12VDC for the network camera.
Connect the positive (+) pole to the '+' position and the negative (-) pole to the '-' position.
CAUTION:
Network Connection & IP Assignment
The eneo Site Manager (downloadable from www.eneo-security.com) is used to locate all
eneo network cameras in a local network. The tool does not need to be installed with a
setup program. The program exe-file can be started with a simple double click to use the
program.
12
Description
Ethernet, RJ-45 port compatible with 10/100Mbps having PoE functionality
Main Power, DC Jack, 12 VDC
• Be careful not to reverse the polarity when you connect
the power cable.
• You can also use a router featuring PoE (Power over Ether-
net) to supply power to the camera.
• If PoE and 12 VDC are both applied, the camera will be
supplied with the power from PoE.
Publicité
