Additional information
1
Switch the system into standby.
2
Press SYSTEM SETUP.
3
Use the
(cursor left/right)
buttons to select 'TV System?', then press
ENTER.
4
Use the
(cursor up/down)
buttons to select Auto, PAL or NTSC, then
press ENTER to confirm.
Disc
Player setting
Type
Format NTSC
DVD
NTSC
NTSC
PAL
NTSC
Video CD
NTSC
NTSC
PAL
NTSC
CD/no disc —
NTSC
Watching NTSC on a PAL TV
(MOD. PAL)
Most models of the newly developed count-
down PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical
amplitude, resulting in a display without
vertical shrinkage. However, in some cases,
the image may appear without color.
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops
rolling.
On some TVs, the picture may shrink verti-
cally, leaving black bands at the top and
bottom of the screen. This is not a malfunc-
tion; it is caused by the NTSC to PAL conver-
sion.
Resetting the system
Use this procedure to reset all system settings
to the factory default.
1
2
button for about 8 seconds until the
display shows 'Mem.Clr.?'.
3
All the system's settings are now reset, and
you should see the 'Let's Get Started' screen.
PAL
AUTO
Dimming the display
MOD.PAL NTSC
PAL
PAL
The display has three brightness levels (1–3).
MOD.PAL NTSC
1
brightness level of the display unit.
PAL
PAL
PAL
NTSC or
Using and taking care of discs
PAL
Titles, groups, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
DVD-Audio discs are divided into one or more
groups that can each contain a number of
tracks.
Switch the system into standby.
Press and hold the top panel
Press the top panel
• Default setting: 3
Press DIMMER to change the
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
Group 1
Group 2
Track 1
Track 2
Track 3
Track 1
13
(Stop)
button.
Title 3
Group 3
Track 1
Track 2
79
En