Haier JG45B Mode D'emploi page 8

 ANTI-TIP BRACKET INSTALLATION INSTRUCTIONS
WARNING: Please use the anti-tip bracket and following below instruction when FREE-STANDING to avoid
the unit TIPPING cause dangerous!
Back of the
1. Anti-tip bracket parts list: (FigⅡ①)
A: Anti-tip bracket (1pc)
B: Hexagon bolt (1pc)
C: Hexagon nut (1pc)
D: Self-tapping screw (2pcs)
E:Expansion screw(1 pc)
Secure the bracket with the screws provided.
2. Anti-tip bracket mounting hold instruction: (FigⅠ)
Loc A: Fixed mounting hole for unit
Loc B: Fixed mounting holds for Real wall
Loc C: Fixed mounting holds for Wood floor
Loc D: Fixed mounting holds for Concrete floor
3. Anti-tip bracket installation steps:
The bracket can installed at the left bottom OR right bottom of the back of the unit. You can choose
which side is convenience for you.
IMPORTANT: Determine the final location of the range before attempting to install the bracket.
You need to choose below installation method one of three ways.
1 REAL WALL installation: (FigⅡ②)
After confirmed the install location, place the bracket on the floor with Loc B against the real wall, use D:
Self-tapping screw (2pcs) align Loc B and secure the bracket into real wall.
Move the unit to align to the bracket Loc A, use B: Hexagon bolt (1pc) and C: Hexagon nut (1pc) to fix.
NOTE:
The screws MUST enter into a wood sill plate. I f the wall contains any metal studs or similar materials,
then the floor installation must be used
2. WOOD FLOOR installation: (FigⅡ③)
After confirmed the install location, place the bracket on the wood floor, used D: Self-tapping screw
6
EN