DELTA DORE TYXIA 631 Mode D'emploi page 39

5.1 Manual adjustment for the shutter travel time
EN
The learning for the shutter travel time adjusts itself
automatically for each complete cycle from stop to
stop.
If the motor has 4 wires (Live/Neutral/Raise/Lower)
or if the power of the connected motor is less than
45 W, this operation must be done manually.
5.1.1 Adjustment of shutter travel time
- Before making this adjustment, fully raise the
shutter with the local hard-wired control, a remote
control or a TYDOM and press Stop.
- Briefly press the button five times, then press the
button againfor 6 seconds, the LED is on and steady.
Release.
- The LED flashes six times.
- Press the receiver button for 3 seconds to confirm,
the LED then switches off.
39