DELTA DORE TYXIA 631 Mode D'emploi page 35

3.2 Associate multiple receivers
or motors
❶ Set the receivers to association standby mode.
❷ On the remote control press
same time and hold for 3 seconds, until the LED
flashes. Release.
The remote control searches the different receivers
or motors.
The LED flashes red, then briefly green as soon as a
new receiver is found.
❸ When the LED starts flashing red slowly, press
and
seconds until the red LED turns on.
❹ The shutters are activated briefly to confirm the
association.
at the same time and hold for 3
and at the
EN
35