DELTA DORE TYXIA 631 Mode D'emploi page 27

2/ Installing the receiver
Recommendations
IMPORTANT: the control wires are not insulated
from the mains power supply. All connected equip-
ment must be marked CE and meet the require-
ments of the low voltage devices as well as assembly
recommendations. Local control wires can be
extended up to 10 m (separate from the 230 V).
The roller shutter high and low stops must be set
before the receiver is installed.
10 A
Use an electrically isolated tool to
perform the actions on the receiver
configuration button.
10A circuit breaker required.
EN
27