Lenze EPM-H310 Instructions De Mise En Service page 29

All manuals and user guides at all-guides.com
1 Preface and general information
The EPM-H310 keypad can be used to access codes of Lenze controllers, 9300 Servo PLC and Drive
PLC and to facilitate the use of these devices.
The HMI Designer is the powerful development environment for creating projects containing the
configuration of the keypad.
The EPM-H310 keypad can be used with:
•
8200 frequency inverters (with AIF function module for system bus CAN)
•
8200 vector frequency inverters
•
93XX servos
•
9300 Servo PLC
•
Drive PLC
Controller connection via system bus (CAN)
1.1 About these Operating Instructions
•
These Operating Instructions are designed to ensure safe and trouble-free working on and with
the EPM-H310 keypad.
•
All persons working on and with the EPM-H310 keypad must keep these Operating Instructions
to hand and observe all relevant information and notes.
•
These Operating Instructions must always be kept as a complete legible document.
1.2 Terminology used
Term
Controller
HMI
L
Preface and general information
Meaning in this document
Lenze 8200 and 8200 vector frequency inverters, 9300 servo inverters
Human Machine Interface
EDBEPM-H310 DE/EN/FR 2.0
29