Emergency Procedure - Zipper Maschinen ZI-DRM 51 Manuel D'utilisation

Use the machine only in good enough light to allow a safe operation can be guaranteed.
In tiredness, decreased concentration or under the influence of alcohol or drugs, the work on
the machine is prohibited!
Caution in slippery conditions - slip hazard - risk of injury. When working, robust and non-slip
footwear. Slides / stumble / traps are a major cause of serious injury or death.
The machine may only be operated by trained personnel.
Unauthorized persons, especially children and not trained personnel must be kept away from
the running machine!
If you pass the machine to third, these instructions must be attached to the machine.
Before each use, the reliability of the machine is to be checked (tightness of the cutting tool,
the proper function of the throttle lever)
Danger of burns! During the operation flow of hot exhaust gases and engine parts such as the
carburettor and engine become hot.
After the operation, the machine must cool down. Otherwise there is an imminent risk of
burns
WARNING: Gasoline is highly flammable!
Smoking and open flames are prohibited during refuelling. Do not refuel when the engine and
carburettor are still very hot.
Refuel only outdoors or in a well ventilated area.
Avoid contact with skin and clothes (fire hazard).
Check after refuelling tank cap and check for leaks.
Start the engine at least 3 meters from the tank location.
Spilled fuel is wipe immediately.
Work attentively, safety conscious and always be fully aware safe stand when working!
Caution on uneven work surfaces and work surfaces with a slope!
Regular breaks reduce the security risk to loss of control due to fatigue.
Avoid abnormal posture.
No other person shall remain within 15m!
This distance also adhere to things!
Danger of damage!
Solid objects, stones, metal parts, or the like can be thrown out - risk of injury!
Use personal safety equipment: ear protectors, safety goggles, safety shoes and safety
helmet when working with the machine
Do not grab in the cutting tool while it is rotating.
Take care that you do not get under the cutting tool!
Always use the correct cutting tool for the work to be done.
Do not operate in an enclosed or confined areas.
Exhaust contains poisonous carbon monoxide. The exposure can cause unconsciousness and
death.
Before the start, after the failure or shock, be sure to check the device and make sure that it
is in good condition.
Wear firm gloves when you use the brush cutter or if you install or remove the cutting blade.
TRANSPORT NOTES:
 Switch off the engine
 Secure the machine
 Empty tank completely, avoid fuel spillage
To avoid damage to the device never drag but always lift correctly.
STORAGE NOTES:
 Remove and clean thread head and cutter blade
 Fit the blade guard
 Clean the machine and dry
 Empty Tank completely, avoid fuel spillage
Store in a dry, out of reach of children place, well packaged (protection against cuts)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-DRM51

Emergency procedure

A first aid kit in accordance with ISO3864 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
3. Number of injured people
N O T I C E
2. Type of accident
4. Injury type(s)
SAFETY
25