Aiwa CSD-MP100 Mode D'emploi page 5

TAPE OPERATION
• Use Type I (normal) tapes only.
• The player plays (records on) the side facing out.
Playing a tape
1
Select TAPE/6STANDBY with
FUNCTION.
2
Press Z STOP/EJECT to open the
cassette compartment and insert a
recorded tape.
Insert it with the exposed side up and the side to
be played facing out.
Then close the compartment.
3
Press x PLAY.
The power is turned on and playback starts.
During tape operation, "TAPE" is displayed.
Additional operations
Z STOP/EJECT - Stops play. The power is tuned
off.
a PAUSE - Pauses play. To resume play, press
again.
f FF, g REW - Fast-forwards or rewinds a tape.
To stop the winding, press Z.
VOLUME - Adjusts the volume.
T-BASS - Enhances low-frequency sound. Press to
turn it on or off.
PAUSE
STOP/EJECT
Recording on a tape
1
Press Z STOP/EJECT to open the
cassette compartment and insert a blank
tape.
Insert it with the exposed side up and the side to be
recorded on facing out.
Then close the compartment.
2
Get ready to record from the source.
To record from a CD, select CD with FUNCTION
and load the CD.
To record from a radio broadcast, select RADIO
with FUNCTION and tune to a station.
(See the following pages)
3
Press w REC to start recording.
x PLAY is pressed simultaneously.
When recording from a CD, press E to start
playback.
Additional operations
Z STOP/EJECT - Stops recording.
a PAUSE - Pauses recording. To resume recording,
press again.
Tips
• Volume or tone adjustment does not affect recording.
• For the best results, use the AC power as a power
source when recording.
• To erase recording, insert a tape and press w REC
while the power is off.
If a high-pitched sound is heard during AM
recording, press REPEAT/MODE (or MODE on the
remote) repeatedly to display "BEAT 1", "BEAT 2" or
"BEAT 3", and select the position that eliminates the
noise.
REC
FF REW PLAY
ENGLISH
5