Aiwa CSD-MP100 Mode D'emploi page 11

Presetting radio stations
You can preset up to 15 stations in each band.
1
Select a station.
2
Press PROGRAM once so that
"PROGRAM" is displayed.
The station is stored in memory and the preset
number, beginning from "01" in consecutive order
for each band, is displayed for a few seconds.
3
Repeat steps 1 and 2 to store other
stations.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band. ("P-FULL" will be displayed.)
To listen to preset stations
Select a band then press E PRESET (or E on the
remote) repeatedly.
To select a preset number directly with the
remote
Press the number buttons 1-9 and 0/10.
When selecting a preset number over 10, press >10
first, then the corresponding number buttons.
Example:
To select number 15, press >10 first, then 1 and 5.
To select number 10, press 0/10. (or >10 first, then 1
and 0/10.)
To clear a preset station
Select the preset number first. Then hold down
PROGRAM so that "PROGRAM" in the display
disappears.
The higher numbers in the band are decreased by one.
11
ENGLISH