Hausmann 6849.468 Manuel De L'utilisateur page 50

Bdal 6849.468 07.12.2009
MOUNTING THE ROUTER
See Figure 14
6. Mount the router with adapter base plate using the through holes
in the tabletop. Assemble with 3 screws (AC) through tabletop and
into the adapter base plate at position H. (The adapter base plate comes
from the factory with the nuts pressed into it.) Hand-tighten securely.
Make sure the screws from router base plate are long
enough to mount router securely. Replace with longer
screws if necessary. NOTE: When mounting router using
F hole pattern pan head screws must be used. All other
hole patterns use countersink screws. Make sure screws
are assembled flush or below surface of the adaptor
plate.
Always support router when mounting and dismounting
from the router table.
AC (3)
50
12:29 Uhr Seite 50
AC
Fig. 14