Hausmann 6849.468 Manuel De L'utilisateur page 45

Bdal 6849.468 07.12.2009 12:29 Uhr Seite 45
ASSEMBLY
ATTACH THE FENCE
See Figure 7
1. Attach the safety shield (A) to the fence (B) with 2 pan head screws (AD).
Use a #3 Phillips screwdriver to tighten the screws.
AD (2)
See Figure 8
2. Place the 2 washers (Y) on top of the 2 holes in the fence (B), insert
the 2 knob screws (W) into the holes and fasten on the other side with
the 2 flat nuts (X). NOTE: Do not tighten the 2 flat nuts at this stage.
Y (2) X (2)
W
Y
B
X
AD
A
B
Fig. 7
Fig. 8
45