Hausmann 6849.468 Manuel De L'utilisateur page 49

Bdal 6849.468 07.12.2009 12:29 Uhr Seite 49
MOUNTING THE ROUTER
I. Mounting Routers with 7" Round Adapter Base Plate
See Figure 13.1, 13.2 and 14
1. Remove the base plate from router.
2. Place the adapter base plate (D) on the router base according
to mounting pattern identified in chart (on previous page). See Figures
13.1 and 13.2.
3. Use the screws removed from the router base plate to attach
the adapter base plate to the router base. Tighten screws securely.
4. Routers with A and AB hole pattern use three countersink
5/16" - 18 x 3/4" screws (AJ), to attach the adapter base plate (D) to
the router. For Ryobi routers RE600 and RE601 use three M 8 x 20
countersink screws (AK).
5. To securely mount Craftsman routers that use the E-hole pattern
to the adapter plate (D), three 10 - 32 x 1/2" countersink screws are
required (not provided).
NOTE: Use only countersink screws to attach the adapter base plate to the
router base.
NOTE: For the router RONA 2001520 use only the second adapter plate
and three countersink screws (AM) M 6 x 20.
AJ/AK (3)
D
AM (3)
NOTE:
Countersink screws
D
Fig. 13.1
Fig. 13.2
49