Operation - Hausmann 6849.468 Manuel De L'utilisateur

Bdal 6849.468 07.12.2009

OPERATION

Connecting a Vacuum
A port is provided in the fence which will accept standard 1-1/4" (32 mm)
and 2-1/2" (63 mm) vacuum hose connections. It works with most shop
vacuums. If the vacuum is plugged into the switch box, it will turn ON and
OFF simultaneously with the router.
Assemble and using the Inserts
See Figure 19
Inserts help reduce the amount of wood chips and dust that can accumulate
on the router table. They can also lend stability to the work piece. Four
inserts come with your router table. Three of the inserts are for use with
a specific size bit (refer to the following chart).
S
T
U
Diameter
of insert
1-1/8" (28.6 mm)
2-1/8" (54 mm)
2-7/8" (72.9 mm)
Do not use a router bit with a diameter greater than
3-1/2" (88.9 mm). Consult your router manual for the
maximum size of router bit allowable.
You may need to use extended shaft bits approximately
2" (50.8 mm) or longer to fit some applications.
Before removing insert, switch box must be in OFF
position, router switch must be in OFF position and
power cord must be unplugged from outlet.
56
12:29 Uhr Seite 56
R
Diameter of
router bit
to be used
1" (25.4 mm)
2" (50.8 mm)
2-3/4" (69.9 mm)
Fig. 19
Figure 19
Reference
S
T
U