CAME BX-246 Manuel Pour L'installation page 37

Power supply for accessories
Terminals for powering the following accessories:
- 24V AC normally;
- 24V DC when the emergency batteries are
working;
Maximum allowed power: 35W
230V (AC) Power, 50/60Hz
frequency
Warning devices
Movement fl ashing light (Contact range: 24V – 25W max) -
Flashes during the gate's opening and closing phases.
Open-gate status light (contact range: 24V – 3W max)
- Signal that gate is open; turns off when gate is closed.
Command and control devices
Stop button (N.C. contact)
- Gate stop button. Excludes automatic closing. For motion to resume, press
the command button or the remote control button.
Key selector and/or partial opening button (N.O. contact)
- Partial gate opening for pedestrian access.
Key selector and/or command button (N.O. contact)
- Gate opening and closing command.
By pressing the button or turning the selector key, the gate inverts
its movement or stops depending on which the settings on the DIP
switches.
Cable lug with bolt and washer for connecting to earth.