SOLAC AE2529 Mode D'emploi page 13

HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are
•
fully discharged prior to its withdrawal from the
apparatus.
CAUTION: the appliance must be disconnect-
•
ed from the supply mains when removing the
batteries.
To remove the batteries, once the life of the
•
appliance, proceed as follows:
Remove the dust tank pressing the removal
•
dust tank button (Fig. 3)
Remove the screws T1, T2, T3, T4. (Fig. 7)
•
Remove the screws T5, T6, T7. T8. T9, T10,
•
T11, T12 and separate the two body parts.
(Fig. 8)
Disconnect connections C1, C2 and C3. (Fig.9)
•
Disconnect connection C4. (Fig. 10)
•
Safely remove the battery from its housing.
•
This appliance complies with Directive 2014/35/
EC on Low Voltage, Directive 2014/30/EC
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products
EN