SOLAC AE2529 Mode D'emploi page 11

USE AND CARE:
Do not use the appliance without its filter(s)
•
correctly in place.
Do not use the appliance to gather up water or
•
any other liquid.
Do not use the appliance if the on/off switch
•
does not work.
Respect the MAX level indicator. (Fig.1)
•
Remove the batteries from the appliance if you
•
are not going to use it for some time.
This appliance is for household use only, not
•
professional, industrial use.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not work on areas where there are metal
•
objects, such as nails and/or screws.
Never vacuum hot or sharp objects (cigarette
•
butts, ashes, nails, etc.).
Do not open the battery/ies under any circum-
•
stances whatsoever.
Only use the appliance for carrying out dry
•
tasks.
Do not use the appliance on any part of the
•
body of a person or animal.
Recharge the battery/ies only with the charger
•
supplied by the manufacturer. A charger that
is suitable for one type of battery may cause
explosion or fire hazard when used with other
battery/ies.
Use the device only with the battery/ies for
•
which has been specifically designed. The use
of any other battery/ies s can cause an explo-
sion or fire hazard.
SERVICE:
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Vacuum cleaner base
•
B ON/OFF and CHARGING pilot light
•
C Deposit
•
D On/off switch
•
E Vacuum cleaner handle
•
F Vacuum cleaner body
•
G Screw for fixing handle and body
•
H Battery indicator
•
I Rotating brush
•
J Shoe wheels
•
K Deposit cover
•
L Washable motor filter
•
M Washable deposit filter
•
N Wall bracket for charging
•
O Battery charger
•
P Brush LEDs
•
Q Dust removal button.
•
R Hook to hang.
•
If the model of your appliance does not have
•
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTALLATION
Be sure to remove all packaging material from
•
inside the appliance.
ASSEMBLING THE WALL BRACKET:
The appliance has a wall bracket (N) on which
•
it can be supported.
Fix the wall bracket as you think appropriate,
•
using plugs, screws, and adhesive...
Make sure that the bracket is firmly fixed; it
•
should be able to support twice the weight of
the appliance.
Place the hook R on the back of the appliance.
•
(Fig. 11)
Fit the appliance into the wall support.
•
CHARGING THE BATTERY
Caution: A new battery is not fully charged and
•
must therefore be charged before the appli-
ance is used for the first time.
Charge the battery at an atmospheric temper-
•
ature of between 4 and 40ºC.
Plug the charger (O) into the mains.
•
Approximately 4 to 5 hours are needed for a
•
complete charge of the battery. Never attempt
to over-charge the battery (although it is rec-
ommended that the first charge of the battery
be of 6 hours in duration).
The pilot light will come on to indicate that the
•
charger is charging the battery.
When the battery is charged disconnect the
•
charger from the mains supply.
NB: Do not use the appliance while it is con-
•
nected to the charger.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that product's packaging has been
•
removed.
Before using this product for the first time, it
•
is important to make a full charge of batteries.
EN