SOLAC AE2529 Mode D'emploi page 12

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Prepare the appliance according to the func-
tion you wish to use:
USE:
Turn the appliance on, by using the on/off but-
ton.
Turn the appliance on, by using one of the
speed selection buttons.
The pilot light (B) comes on.
Select the desired speed. (Fig. 2)
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Turn the appliance off using the on/off button.
Clean the appliance.
PARKING POSITION:
This appliance has its own parking position for
comfortable and straightforward storage.
CLEANING
Disconnect the battery charger from the mains
and allow it to cool before undertaking any
cleaning task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
Remove the dust tank pressing the removal
dust tank button (Fig. 3)
Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig.4)
Check the condition of the dust box filter.
Check the condition of the motor filter.
Assable the dust tank to the vacuum cleaner
body.
CHANGING THE FILTERS:
Air entry filter, it is advisable to be changed at
least once a year or every 50 hours of the ap-
pliance's use.
TO REMOVE THE FILTERS:
Remove the dust tank pressing the removal
dust tank button (Fig. 3)
Remove the filter from its housing, turning the
filter to the left side. (Fig.5).
To reassemble the filter, proceed with the
above instructions, in reverse order.
CLEANING THE ROTARY BRUSH:
To remove the brush:
Press the flap in the bottom of the turbo brush
in order to release the brush. (Fig.6)
Remove the brush and clean.
To reassemble, follow the above instructions
but in reverse.
SUPPLIES
Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
Always use original supplies, designed specifi-
cally for your appliance model.
These supplies are available in specialist
shops.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations
of substances that could be considered harm-
ful to the environment.
- This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic Equipment
(WEEE).
- This symbol means that product may in-
clude a battery or batteries; user must to
remove them before disposing of the prod-
uct. Remember that batteries must be disposed
of in duly authorised containers. Do not dispose
of them in fire.
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ae2536

Table des Matières