Electro Depot Valberg 973715 Consignes D'utilisation page 25

B
Product usage
Place the wall mount on the wall, leaving a space of at least 150 cm between the floor
and the bottom of the wall mount. Mark the drill holes for the screws with a pencil. Then,
drill the holes and insert the wall plugs. Place the wall mount over the wall plugs and
tighten the screws using a screwdriver.
DANGER! RISK OF ELECTRIC SHOCK!
• Do not pierce any electric cables or water pipes located in the wall.
• Do not install the wall mount on a metal wall.
24 EN