Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
Securely insert the 2-in-1 brush tool into the extension hose or the main unit's air inlet.
•
This brush is retractable.
•
Use the flat side to vacuum beds, sofas, rugs or any other flat surfaces. Use the brush
for general dusting tasks, such as dusting furniture and shelves, etc.
Detaching the tools
•
Make sure that the unit is switched off.
•
Pull off the crevice tool/2-in-1 brush or press the release button on the extension tube/
motorised brush to detach these tools from the main unit.
Operation
Press the On/Off button to turn on the vacuum. The battery LED indicator(s) will then
turn on to indicate the current battery level (1-2).
Press the speed button to choose a slow (LOW) or fast (HIGH) speed. The power level
indicator lights up when the fast speed is selected and turns off whenever the slow
speed is chosen.
•
To turn off the vacuum, press the Power button again.
•
Empty the dust cup before its contents exceed the "MAX" level mark (see Emptying the
dust cup in the Cleaning and Maintenance section).
•
Always turn off the unit when you have finished using it. To clean the unit, follow the
instructions in the Cleaning and Maintenance section.
•
Charge the vacuum cleaner after each use to ensure the unit is fully charged and ready
for the next use.
NOTE: When vacuuming heavily soiled surfaces, regularly turn the unit off and
check the mouth of the tool to ensure that it is clean and to avoid scratching
delicate surfaces.
Installing the wall mount
NOTE:
•
Securely install the wall mount on a wall that is strong enough to support
the weight of the unit.
•
Install the wall mount in a dry area, away from extreme heat or cold, and
ideally close to a mains socket.
The wall mount (with the supplied wall plugs and screw) can be installed to easily store the
vacuum cleaner.
23
EN
Publicité
