IKEA RYTMISK Mode D'emploi page 7

ENGLISH
Use
• Switch off or unplug the appliance
from the mains supply before
carrying out any maintenance work.
• The top of the hood must not to be used
as a shelf.
• The extractor hood has been
designed exclusively for domestic
use to eliminate kitchen smells.
• Never use the hood for purposes
other than for which it has been
designed.
• Never leave high naked flames under
the hood when it is in operation.
• Adjust the flame intensity to direct
it onto the bottom of the pan only,
making sure that it does not engulf
the sides.
min 471 mm
Deep fat fryers must be continuously
max 861 mm
monitored during use: overheated oil
can burst into flames.
Installation modes
The hood has been designed to be installed
and used either as a "Exhaust mode", or as
a "Recirculation mode".
Exhaust mode (see symbol in
installation booklet)
min 471 mm min 471 mm
min 569 mm
Cooking steam is sucked and
max 861 mm
max 861 mm max 861 mm
channelled outside the house through
a discharge duct (not supplied), fitted to
the hood steam outlet.
Ensure that the discharge duct is
correctly fitted to the air outlet, unit
using an appropriate connection
system.
Recirculation mode (see symbol
in installation booklet)
min 569 mm
max 861 mm
The air is filtered through one or more
min 569 mm
max 861 mm
the charcoal filters, and then resent into
room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied
without charcoal filters and installed on
recirculation mode, these must be fitted
before the hood can be used. Filters are
available in shops.
The hood should be installed away from
particularly dirty areas, windows, doors
and heat sources.
The accessories for wall fixing are not
included because wall made of different
materials require different types of
fixing accessories. Use fixing systems
suitable for the walls of your home and
the weight of the appliance. For more
details, contact a specialized dealer.
Keep this booklet for future
consultation.
9
7