Dräger Polytron 6100 EC WL Notice D'utilisation page 35

®
3.2.2 Dräger Polytron Repeater ISA100
®
The Dräger Polytron Repeater ISA100 is a version of the Dräger Polytron
6100 EC WLwithout measuring function.
3.3 Sensors
The gas detector is intended for use with the DrägerSensor
(electrochemical). Select the sensor according to the target gas to be
measured.
3.4 Interfaces
Interface
™
ISA100 Wireless network
®
Bluetooth
3.5 Intended use
®
3.5.1 Dräger Polytron 6100 EC WL
The gas detector is used in conjunction with the built-in DrägerSensor
monitoring toxic gases and oxygen.
®
3.5.2 Dräger Polytron Repeater ISA100
The repeater is used to relay data from other ISA100 Wireless ™ network
subscribers.
3.6 Approvals
The approvals are shown on the name plate. A copy of the name plate and the
declaration of conformity can be found in the document "Notes on Approval"
(order no. 93 00 060).
Instructions for use |
Dräger Polytron
®
EC
Connection via the network (see "Network
integration", page 40).
®
Connection to a Windows mobile device
in the field (see "Activating the Bluetooth
interface", page 36).
®
®
6100 EC WL, Dräger Polytron
4 Operation
®
Task
Connect toPoly-
Soft.
Activate the Blue-
®
tooth interface.
Reset the gas
detector.
Reset the battery
counter.
If the gas detector is operated by a battery, do not remove the battery box
during configuration.
®
4.1 LED display
Symbol LED display
for
Green LED
flashes once
Yellow LED
flashes once
Yellow LED lights
up continuously
®
Repeater ISA100
ISA100 Wireless
®
Bluetooth
™
- network
-
Meaning
Gas detector is switched on
Alerts (e.g., low battery or sensor warm-up
phase active) or maintenance mode
Error
| en
Operation
Magnetic pen
-
35