Publicité
Les langues disponibles
Les langues disponibles
the Manufacturer.
HOW THIS APPLIANCE WORKS
The special UV-A lamps are set to attract all flying insects to the
appliance. When insects approach they remain stuck on the glued
paper (supplied as a spare part). This appliance allows capturing the
flying insect within the environment nearby.
INSTALLATION
The appliance can be installed on a flat surface or hanged on the
ceiling.
An electrical outlet must be present nearby. Position the appliance
preferably at a height of about 2 m placing it in the darkest area of the
room, far from windows. This because the appliance must eliminate
insects from indoors and must avoid attracting other from outdoors
inside the room. The wall should be free from obstructions to allow
easy removal of the glued paper and the cleaning of the appliance.
MAINTENANCE
Before any maintenance or cleaning of the appliance make sure
that the device is unplugged from the electrical wall socket.
The glued paper must be replaced at least once a month or more if the
environment is full of insects or very dirty (fig. 2). A general cleaning
of the appliance must be done periodically, and each time that the
glued paper is changed. For this operation you must use a cleaning
substance suitable to be used within food-processing environments.
Once the cleaning operation is finished, set a brand new glued paper
on its place.
Take the protective film off the glued paper, place it on the base of
the appliance avoiding sticking it on the lamps. All rejected or used
glued papers must be drained in accordance to the local regulations
in which the appliance is settled.
All maintenance operations must be done on a table or on the floor,
so if the appliance is hanged it must be temporarily removed, to allow
any maintenance operation.
9
Publicité
