Publicité
Les langues disponibles
Les langues disponibles
V1.1
INTRODUCTION
The TRUBLU LoPro Welding Mask provides 5 to 13 shade protection for
your eyes while the faceplate stops welding spatters and ultraviolet and
infrared radiation. The grind function can be activated or deactivated
without removing the goggles.
There is room under the welding mask to fit a standard half-welding mask
respirator. The faceplate can be removed.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the risk
of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-
lit and free of distractions. Place lights so you are not working in a
shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the
reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
1.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
2.
Wear protective clothing designed for the work environment and
tool.
3.
Control the tool, personal movement and the work environment to
avoid personal injury or damage to the tool.
4.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
Visit www.princessauto.com for more information
TRUBLU LoPro Welding Mask Kit
8977084
3
Publicité
