All manuals and user guides at all-guides.com
Call waiting
(Menu9.5.4)
(network dependent)
Activate: If you select Activate, you can accept
v
a waiting (receiving) call.
Cancel: If you select Cancel, you cannot
v
recognize the waiting (receiving) call.
v
View status: Shows the status of Call waiting.
Minute minder
(Menu 9.5.5)
If you select On, you can check the call duration by
a beep sound given every minute during a call.
Auto redial
(Menu 9.5.6)
On: When this function is activated, the phone
v
will automatically try to redial in the case of
failure to connect a call.
Off: Your phone will not make any attempts to
v
redial when the original call has not connected.
Send DTMF
(Menu 9.5.7)
You can send touch tones during an active call to
control your voice mailbox or other automated
phone services.
Security
PIN code request
(Menu 9.6.1)
In this menu, you can set the phone to ask for the
PIN code of your SIM card when the phone is
switched on.
If this function is activated, you'll be requested to
enter the PIN code.
1. If you enter wrong PIN code more than 3 times,
the phone will lock out. If the PIN is blocked, you
will need to key in PUK code.
2. You can enter your PUK code up to 10 times. If
you put wrong PUK code more than 10 times,
you can not unlock your phone. You will need to
contact your service provider.
Phone lock
(Menu 9.6.2)
You can use a security code to avoid unauthorized
use of the phone. Whenever you switch on the
phone, the phone will request security code if you
set phone lock to When switch on.
If you set phone lock to When SIM changed, your
phone will request security code only when you
change your SIM card.
Call barring
(Menu 9.6.3)
The Call barring service prevents your phone from
making or receiving certain category of calls. This
function requires the call barring password. You
can view the following submenus.
Menu 9.6
43