Nice One 0682 Instructions Et Avertissements Pour L'installation Et L'utilisation page 3

ENGLISH
– PRODUCT DESCRIPTION AND
INTENDED USE
This receiver is part of the series "NiceOne" produced by Nice
spa. The receivers in this series are destined for use on the
control units fitted on systems for the automation of gates,
garage doors and road barriers. Any use other than as
specified herein is to be considered improper and is
strictly prohibited! The manufacturer denies all liability for
damage deriving from improper use of the product and
use other than as specified in this manual.
Various models are available, with the specifications as stated
in the table below.
1.1 – The "NiceOpera" system
The receivers in the series NiceOne are part of the "Nice-
Opera" system. This system has been designed to simplify
the programming phases, use and maintenance of the
devices normally used in automation systems. The system
Mod. Frequency
OXI 433.92 MHz
OXI8 868.95 MHz
OXIT 433.92 MHz
OXI8T 868.95 MHz
OX2 433.92 MHz
OX28 868.95 MHz
OX2T 433.92 MHz
OX28T 868.95 MHz
Function Connection
Receiver Connector type
Receiver Connector type
Receiver-transmitter Connector type
Receiver-transmitter Connector type
Receiver with 6-core cable
Receiver with 6-core cable
Receiver-transmitter with 6-core cable
Receiver-transmitter with 6-core cable
comprises various software and hardware devices capable of
intercommunicating via radio, by means of the "O-Code"
encoding system or a "physical" connection via cable.
The main devices that make up the NiceOpera system are:
– NiceOne transmitters;
– NiceOne receivers (family OXI... ; family OX...);
– O-box programming unit;
– Control units and gearmotors with "T4 Bus";
– O-View programmer for devices with "T4 Bus".
IMPORTANT – For further details on all functions of the
NiceOpera system and interdependency of the various
devices in the system, refer to the general manual "Nice-
Opera System Book", also available on the Internet site
www.niceforyou.com.
Notes to table: The letter "T"
in the model name indicates a
receiver with built-in transmit-
ter.
This receiver is called a
"receiver-transmitter".
EN
3