Inserting / Removing The Battery - Wayscral TAKEAWAY E100 Notice D'utilisation

3.

Inserting / removing the battery

The battery on the power-assisted bicycles is placed on the rear rack, it is directly connected to the
control box at the front.
WARNING: Before handling the battery, make sure the switch is in the off
position.
To install the battery, first slide the battery pack along the rail horizontally and press to make sure it is
securely in place and lock.
To lock insert the key into the lock and turn it halfway clockwise (battery and luggage rack locked). You
can unlock by turning halfway counter-clockwise.
WARNING: Remember to remove the key and keep it safe after removing the
battery from the rack!
Locked
50
Unlocked