Sony PlayStation 2 SCPH-39001/N Mode D'emploi page 9

Network adaptor
Front
LINE NETWORK
Rear
Warning
Never connect phone cords or network cables of types other than those specified in this manual to the
line connector and network connector. For details, see "Connecting the network adaptor to a phone
line" (page 12) or "Connecting the network adaptor with a network cable" (page 13).
PlayStation 2 Console
®
Rear (with network adaptor removed)
Line connector
Connect phone cord here for dial-up modem
use only.
Network connector
Insert network cable (100Base-TX/10Base-T)
here for Ethernet connection.
Buzzer port
Mounting screws
To fasten the network adaptor to the
PlayStation 2 console.
®
Console connector
Connect to the expansion bus connector of the
PlayStation 2 console.
®
HDD data connector
HDD power connector
Expansion bus connector
EXPANSION BAY
Positioning the console
You can position the console either horizontally
or vertically.
When positioning the console vertically, use the
SCPH-10040 U vertical stand (for PlayStation
(sold separately). If a vertical stand (for
PlayStation 2) is not available, set the console
®
in the horizontal position as shown below.
When positioning the console horizontally, you
can use the SCPH-10110 U horizontal stand (for
PlayStation 2) (sold separately).
®
Horizontal position Vertical position
Notes
• Do not place the console in any position other than the
horizontal or vertical positions as doing so may damage it.
• Do not change the position of the console (from horizontal
to vertical or vice versa) while it is in operation. Doing so
may damage the disc or cause the console to malfunction.
The " " product family logo located on
the disc tray
The " " product family logo on the disc tray
2) can be rotated to match the horizontal or
®
vertical positioning of the console.
9
US