Broan-NuTone BKSJ1 Manuel D'installation, D'entretien Et D'utilisation page 20

LED Light Bulbs
The BKSJ1 Series range hoods require two LED light bulbs (120 V, 4 W max. with GU10 base),
included.
1 ] Align the bulb leads with the small indentations located on the border of the lamp location on
2 ] Gently push upwards and turn clockwise until secure.
NOTE: The Suction Cup Tool (included with hood) can be used to install and remove light bulbs.
Install the Filters
Ducted Installation Only:
Re-install grease filters removed in step 2 on page 9, under "Prepare the Hood" .
Non-ducted Installation Only:
Purchase two non-ducted filters from your local distributor or retailer (see product specification
label for filter type). Attach the non-ducted filters following instructions packed with the non-ducted
filters.
20
BULB LEADS
hood (see inset above), then install the bulbs by placing the bulb leads into their grooves in
the socket.
Press suction cup tool on bulb and rotate counterclockwise to remove bulb or clockwise to
install bulb.
BULB LEAD
GROOVES
(IN SOCKET)
SUCTION
CUP TOOL