Cooper Lighting Solutions Halo HCM Serie Instructions D'installation page 10

Installation Instructions – HCM Series Multi Head Installation
3.0 Replacing Reflector:
Procedure: Using both thumbs, put pressure on the Media
holder and rotate counter-clockwise it ¼ turn (Figure 3.1).
Remove Media holder from light head assembly
(Figure 3.2), Remove Spacer ring, Media, Reflector and
replace new reflector into light head assembly (Figure 3.3).
Align and push back Media holder, Spacer ring, Media &
new reflector into light head assembly (Figure 3.4). Put
pressure on the Media holder and rotate clockwise it ¼ turn
(Figure 3.5).
Figure 3.1.
Figure 3.2.
10
Cooper Lighting Solutions
Media Holder
Media Holder
IB517062ML Installation instructions
Media Holder
Spacer Ring
Media
Reflector
Figure 3.3.
Spacer Ring
Media
Reflector
Figure 3.4.
Figure 3.5.
Media Holder