Lamborghini Caloreclima CRONO REM Manuel De L'utilisateur page 86

12.1 Weather curves (KREG)
The Comando Remoto calculates the flow temperature according to the weather curve set in the "KREG"
parameter of the PARAM menu at INST level.
The table below shows the "KREG" parameter range of variability.
Parameter
KREG
As the value set in "KREG" increases, the slope of the weather curve increases, consequently the flow temperature
increases (see "fig. 4 - Graph" on page 87).
The function has the attenuated outside temperature as its input parameter (x-axis).
12.2 Fixed point offset (sP)
It represents a temperature, which is added to the flow temperature, creating a "fixed point adjustment". This
parameter varies as shown in the following table with a resolution of 1°C.
Parameter
SP
12.3 Weather compensation with ambient influence (KORR)
Weather compensation with ambient influence is used to correct the value calculated by the weather curve considering
the difference in temperature between the ambient setpoint (SP
Parameter
KORR
86
EN
Min. Max.
0.1 5.0
Min. Max.
20 40
Min. Max.
0 20
cod. 3542A990 - Rev 01 - 03/2022
Default value
1.0
Default value
40
) and the ambient probe (T
a
Default value
4
).
a